AusChartviewer (formerly known as Seafarer Viewer) is a low cost, easy to use application that displays nautical charts in the following international formats:
- IHO S-63 Protected ENC (including AusENC).
- S-57 data.
- Admiralty ARCS.
- Australian HCRF Aligned Products (WA DPI RNC, GBRMPA RNC).
It is a desktop planning and reference tool for those who wish to view nautical charts for shore based applications.
AusChartviewer can not be interfaced with positional equipment such as GPS and Autopilot. However, it provides bearing and distance measurement, route planning functions plus a symbol library and a range of drawing tools that enable users to display their own reference information overlaid on a nautical chart backdrop. Comparing different types of chart data (for example a raster chart and an ENC) in the same geographical area can easily be achieved via a transparency slider.
For a full list of functions, see the AusChartviewer Features page on this website.
AusChartviewer is suitable for those who wish to view nautical charts for shore based applications. It is popular with marine research organisations and is used extensively by port authorities and maritime planning and safety organisations.
Because AusChartviewer can not be interfaced with GPS and Autopliot, it is not suitable for navigation. It is not suitable for commercial vessels required to meet chart carriage requirements under SOLAS Chapter V or National Standards for Commercial Vessels (NSCV) regulations.
AusChartviewer is published on CD-ROM.
Please see our Pricing page.
Where to Buy
AusChartviewer can be purchased directly from the Australian Hydrographic Service. Contact email@example.com.
From time to time AusChartviewer upgrades may be released. To view the latest features, see the AusChartviewer Features page on this website.
The current version of AusChartviewer is version 1.0. Previous versions were released under the banner of 'Seafarer Viewer'.
The main benefits of AusChartviewer version 1.0 over previous Seafarer Viewer releases are:
- Faster data loading.
- Seamless display of chart data.
- Ability to display four independent viewing windows that can view any combination of chart data (for example, RNC and ENC, ENC and AusGeoTIFF etc).
- Displays AusGeoTIFF.
- Supports Windows 7 - 32 or 64 bit.
If you wish to find out more about upgrading your Seafarer Viewer application to AusChartviewer, please contact our Licensing Team at firstname.lastname@example.org.
Why is AusChartviewer different from other Electronic Charting Systems (ECS)?
AusChartviewer was developed as a shore-based planning and reference tool to provide access to electronic charts for non navigational purposes. It has powerful data format comparison tools and is useful for marine research, search and rescue, marine accident investigation and Government departmental operational planning. Whilst AusChartviewer includes traditional navigation functions like bearing and distance measurement and a route planning module it will not interface to GPS to display the computer's current position on the surface of a chart.
Most other ECS are developed as navigation tools for use on vessels. They will include navigation functions bearing and distance measurement, a route planning module and a range of other navigational features and will interface to GPS to display your vessel's current position on the surface of a chart. Most will also interface to the vessel's AutoPilot.
The latest version of AusChartviewer (version 1.0) is supported on the following operating systems:
- Windows XP
- Windows Vista
- Windows 7 – 32 bit and 64 bit
It requires a USB port to accommodate a USB security dongle or a computer with a parallel port to accommodate a parallel port dongle.